Servis-Rhino 2160 - Manual (Page 93)

ASSEMBLY
2160 02/10 Assembly Section 3-11
© 2010 Alamo Group Inc.
ASSEMBL
Y
HYDRAULIC RELIEF ATTACHMENT (OPTIONAL)
(Asm-B-0037) (Required if attaching to a Non-Quick Hitch Tractor)
1. Remove the top link of the three point from the tractor.
2. Connect the center lug (1) of the Hydraulic Relief Arm (HRA) to the tractor, with the double lugs (2) up,
where the top link was removed.
3. Back the tractor up to the SERVIS 2160 and connect the lower arms (3) of the three point, making sure that
the HRA does not interfere with the SERVIS 2160.
4. Attach the top link of the three point between the SERVIS 2160 and the double lugs (2) on the HRA.
5. Connect the SERVIS 2160 Hydraulics to the tractor so that they are functional.
6. Lift the three point of the tractor so that the SERVIS 2160 is at the desired height.
7. Carefully adjust the SERVIS 2160 hydraulics so that the lower arms (3) of the HRA align with the holes (4)
on the SERVIS 2160.
8. Bolt the HRA arms to the SERVIS 2160.
9. Relieve pressure from the tractor three point.
NOTE: Once the HRA has been completely installed, if the 3-point lift is engaged the HRA stabilizer bars will
be bent.