Servis-Rhino 2160 - Manual (Page 97)

ASSEMBLY
2160 02/10 Assembly Section 3-15
© 2010 Alamo Group Inc.
ASSEMBL
Y
Pre-Customer Delivery Check List
1. Is oil level in the tank even with the sight gauge on the tank?
2. Has the proper oil been used in the system?
Proper oil is universal service oil or equal.
3. Does Boom machine movement match operation decal - Swing, Lift, Dipper, and Tilt?
4. Is control valve free and does not stick?
5. Are all hoses tight and do not leak?
6. Are all decals in place? See manual for decal description and placement.
7. Have all grease points been adequately greased?
8. Are all bolts tight?
9. Have all hoses been properly routed so that hoses do not kink or bind when boom
is articulated through all motions?
10. Is machine equipped with proper operator protection? Non-cab tractor must have cage.
11. Is head rotation correct? On rotary heads (looking from the top of the deck) rotation
should be clockwise so that debris will be thrown away from the tractor.
12. Are spindle housing bolts tight? Is spindle assembly tight? Are bolts that hold
blade carrier to spindle tight?
13. Does head operate smoothly at normal operating speed? Head should not
vibrate excessively.