Servis-Rhino 2160 - Manual (Page 87)

ASSEMBLY
2160 02/10 Assembly Section 3-5
© 2010 Alamo Group Inc.
ASSEMBL
Y
HOSE CONNECTION
When assembling the fittings and hoses, be careful not to introduce any dust or contaminants into the system.
Keep all fittings, hoses and hydraulic components sealed until installed. Do not allow any components to lie
open and exposed to dust or contamination. Do not lay parts down on the dirt or sand and then assemble them
as this will introduce contaminants into the system.
To avoid Hydraulic Contamination, always keep all hoses and hydraulic fittings capped until they are ready to
be installed. Asm-B-0006.