Detaching and storing, 1 quick - hitch, Swing the mower head to the rear – Servis-Rhino 2160 User Manual
Page 131: Disconnect pto, Level the frame by adjusting the boom, Lower the stands onto the ground, Disengage the locking mechanism on the quick hitch, 2 hydraulic relief arm, Lower the stand slightly above the ground, Adjust boom to level frame
OPERATION
2160 02/10
Operation Section 4-33
© 2010 Alamo Group Inc.
OPERA
T
ION
DETACHING AND STORING
10.1 Quick - Hitch
1. Swing the mower head to the rear.
2. Place mower head on the ground. Make sure dipper section is vertical.
3. Disconnect PTO.
4. Level the frame by adjusting the boom.
5. Lower the stands onto the ground.
NOTE: Unit might need to be re-leveled.
6. Disengage the locking mechanism on the quick hitch.
7. Lower the 3-point hitch arms until quick hitch comes off the frame.
10.2 Hydraulic Relief Arm
1. Swing the mower head to the rear.
2. Place the mower head on the ground. Maker sure dipper section is vertical.
3. Lift the 3-point hitch to keep pressure on the frame.
4. Lower the stand slightly above the ground.
5. Lower the 3-point hitch lift arms, until stands are on the ground.
6. Adjust boom to level frame.
7. Unbolt the Hydraulic Relief Arm.
8. Disconnect the top link.
NOTE: Frame might have to be re-leveled.
9. Disconnect PTO.
10. Remove valve or remote control box from the tractor or any other hoses, cables, etc. that might still be
connected from the mower to the tractor.
11. Remove the lower arms.