SUPER MICRO Computer 6014H-8 - Manual (Page 116)

C-10
S UPER S ERVER 6014H-8/6014H-82/6014H-X8 Manual
Adding a Bootable Array
1. From the Main menu, select Manage Arrays.
2. From the list of arrays, select the array you want to make bootable and
press Ctrl+B.
3. Enter Y to create a bootable array when the following message is dis-
played: "This will make all other existing bootable array non-bootable. Do
you want to make this array bootable? (Yes/No):" A bootable array will
then be created. An asterisk will appear next to the bootable array.
Deleting a Bootable Array
To delete a bootable array
1. From the Main menu, select Manage Arrays.
2. From the List of Arrays, select the bootable array (*) you want to delete
and press Ctrl+B. (A bootable array is an array marked with an asterisk.)
3. Enter Y to delete a bootable array when the following message is dis-
played: "The array is already marked bootable. Do you want to make this
array as not bootable? (Yes/No):" The bootable array will then be deleted
and the asterisk will disappear.
Note: do not use the delete key to delete a bootable array.