SUPER MICRO Computer 6014H-8 - Manual (Page 47)

Chapter 5: Advanced Serverboard Setup
5-11
X6DHR-8G2 Quick Reference
Jumper Description Default Setting
JP10 3rd PWR Supply Alarm En/Disable Open (Disabled)
JP11 Alarm Reset Closed (Enabled)
JPA1 SCSI Enable/Disable Pins 1-2 (Enabled)
JPA2/JPA3 SCSI CH A/B Term. Enable/Disable Open (Enabled)
JPF PWR Force On Open (Normal)
JBT1 CMOS Clear See Section 5-9
JPG1 VGA Enable/Disable Pins 1-2 (Enabled)
JPL1 GLAN Enable/Disable Pins 1-2 (Enabled)
JWD Watch Dog Pins 1-2 (Reset)
Connector Description
COM1/COM2 COM1/COM2 Serial Port Connector/Header
DIMM#1A-DIMM#4B Memory (SDRAM) Slots
FAN#1-5 Onboard CPU Fan/Chassis Fan Headers
GLAN1/2 Gigabit Ethernet Ports
J3/J4 Serial ATA Connectors
J5/J6 IDE1/2 Hard Disk Drive Connectors
J9 IPMI 2.0 Connector
J11 System Management Bus Header
J12 Floppy Drive Connector
J32 SMB Power Connector
J38 4-Pin 12V Power Connector (required connection)
J1B1 Primary ATX 20-Pin Power Connector
J1D1 8-Pin 12V CPU Power Connector (required conn.)
JA1/JA2 SCSI Channel A/B Headers
JD1 PWR LED (pins 1-3) / Speaker (pins 4-7) Header
JD2 Front Panel USB2/3 Headers
JF1 Front Control Panel Connector
JL1 Chassis Intrusion Header
JOH1 Overheat LED
JP9 Power Fail Detect Header
JP11 Alarm Rest Header (Default: On)
JWOL Wake-on-LAN Header
JWOR Wake-on-Ring Header
USB0/1 Universal Serial Bus Ports
V G A Video (Monitor) Connector