SUPER MICRO Computer 6014H-8 - Manual (Page 69)

Chapter 6: Advanced Chassis Setup
6-7
Figure 6-5. Mounting a SCSI Drive in a Carrier
Figure 6-4. Removing a SCSI Drive Carrier
3. SCSI backplane
All four SCSI drives plug into a single SCSI backplane, which provides
Ultra320 single-channel operation for all SCSI drives. A ribbon cable from
JA1 on the serverboard should be connected to the IN connector on the
SCSI backplane. There is also a power connector on the backplane that
must be connected.
3a
3b
3b