Sim2 Multimedia SVP 420 HB - Manual (Page 30)

SVP 450 PLUS - SVD 500 PLUS
29
ENGLISHENGLISHENGLISHENGLISHENGLISH
The name is a mnemonic label and it is written by the user.
The aspect ratio flag indicates which aspect ratio has been
stored by the user during the regulations setup. It is very
important for the user to store the correct aspect ratio
flag.
The horizontal and vertical frequencies ar measurd by
the projector and stored inthe relevant memory bank each
time you save a regulation setup. When the projector is
switched on, the software automatically loads the last
memory bank selected.
5.8.1 How to enter the memory manager
Press OPT, the following menu will appear:
MEMORY MANAGER
OPTIONS MENU
OSD
INSTALL. TYPE
POWER ON
VCR STABILITY
WORKING TIME
MEMORY MANAGER
Load bank
LOAD
COPY
BN NAME F HOR VER
01 Pal Upc
. . . . .
Pup 16/9
Nstc.....
NstcUpc
Vga 2
Vga 3
N 31.2 50
02 - --.- ---
03 W 31.2 50
04 N 15.7 60
05 N 31.4 60
06 N 35.1 56
07 N 37.6 68
WORK
08
MOVE
DEL
Data saved
MEMORY MANAGER
Modify bank aspect ratio
LOAD
COPY
BN NAME F HOR VER
01 Pal Upc
. . . . .
Pup 16/9
Nstc.....
NstcUpc
Vga 2
Vga 3
N 31.2 50
02 - --.- ---
03 W 31.2 50
04 N 15.7 60
05 N 31.4 60
06 N 35.1 56
07 N 37.6 68
WORK
08
MOVE
DEL
MEMORY MANAGER
Modify bank name
LOAD
COPY
BN NAME F HOR VER
01 Pal Upc
. . . . .
P up 16/9
Nstc.....
NstcUpc
Vga 2
Vga 3
N 31.2 50
02 - --.- ---
03 W 31.2 50
04 N 15.7 60
05 N 31.4 60
06 N 35.1 56
07 N 37.6 68
WORK
08
MOVE
DEL
Use the arrow or to select MEMORY MANAGER and
press ENTER to confirm, the following menu will appear:
WORK 01: It indicates that bank 01 has been recalled.
It is important when the input frequencies do
not match those stored in the bank.
BN: Bank number.
NAME: Mnemonic bank name ( Label )
F: Flag. With this function you can change the
aspect ratio: Small, Normal, Wide, Cinema,
Large.
HOR: Horizontal frequency. It is measured by the
software and stored in the memory bank.
VER: Vertical frequency. It is measured by the
software and stored in the memory bank.
5.8.2 How to insert a label
First of all, you must enter the memory manager.
Press the right arrow and use the up or down arrows
to select in which memory bank you want to change the
label.
Press ENTER, the following menu will appear:
Use the arrow or to scroll the alphabet and the arrow
or to skip at the next letter. After having written the
correct label, press ENTER to confirm.
5.8.3 How to change an aspect ratio
flag
First of all, you must enter the memory manager.
Press the right arrow twice. Select in which memory bank
you wish to change the aspect ratio. Press ENTER, the
following menu will appear:
Data saved
Use the arrow or to select the desired ratio between:
Small, Letter Box, Cinema, Wide, Normal.
Press ENTER to confirm and the following message will
appear:
5.8.4 Horizontal and vertical frequencies
The horizontal and vertical frequencies are measured by
the projector and stored in the relative memory bank each
time you store a change.
If the input signal does not match the frequency stored in
the memory bank the software will automatically recall
the memory bank with the frequency nearest to that of
the input signal, in this order: horizontal frequency, vertical
frequency, aspect ratio.
If the frequencies of the input signal are different from
those stored in the memory bank, the software will not
recognise the frequency and, if you store settings, it will
ask to create a new memory bank.