Sim2 Multimedia SVP 420 HB - Manual (Page 39)

SVP 450 PLUS - SVD 500 PLUS
38
6 TECHNICAL SPECIFICATIONS
6.1 Projection system
- 3 picture tubes, 3 lenses
- Horizontal line system
- Lenses : Hybrid lenses (SVP 450 PLUS)
High definition glass lenses
(SVP 500 PLUS-HD)
6.2 Projection tube
- 7” monochrone tube, high brightness, liquid cooling,
air lenses coupling, electrostatic focusing.
- The external red and blue tubes are mechanically
rotated, the central green tube is fixed (for reference).
6.3 Projection lenses
- High performance hybrid lenses for the model SVP450
- High definition glass lenses for the model SVD 500
- Focus adjustment: centre and borders
- Magnification: 10x to 50x
- Resolution: more than 5 lp/mm at 50% MTF for hybrid
lenses
- Resolution: more than 10 lp/mm at 50% MTF for glass
lenses
6.4 Projected picture size
- 60-250 inches diagonal (121,9 cm to 508 cm, screen
base size)
- Factory adjustment to 90” (183 x 137 cm screen)
- Convergence type: remote control convergence with
zone adjustment
6.5 Light output
- Large area high brightness (100% white)
- (900 lumen at white peak).
6.6 Projector video resolution
- RGB VIDEO input: more than 1000 TV lines.
6.7 Colour temperature
- 3200,6500,9300 Kelvin degrees instrumentally
adjusted by the manufacturer, plus a memory
adjustable at will.
- The colour temperature can be selected and adjusted
by means of the remote control.
- The video projector is set at factory for a 6500°K colour
temperature.
6.8 Automatic cut off
- The projector automatically performs the cut-off for the
colour temperature stability at set intervals.
6.9 Adjustments
- All of the projector adjustments can be carried out by
means of the remote control except for mechanical
centering of the tubves and optical focusing.
6.10 Picture adjustments
- Contrast-brightness-colour (for standard PAL, SECAM,
NTSC 4.43, NTSC 3.58)
- Hue (only for NTSC 4.43 and NTSC 3.58)
- Peaking
6.11 Geometric adjustments
- Size - Centering - Linearity - Skew - Bow - Keystone -
Pincushion - Borders, Quarters, Corners.
6.12 Inner test patterns
- Crosshair - Crosshatch - Dots - H characters - White
field - White window (10% white window) - Colour bars.
6.13 Global adjustments and
selection
- Blanking windows.
- H and V dynamic focus adjustments.
- White balance adjustments.
- Sync phase adjustment.
- Selectable installation type.
- Memory manager.
- RS-422 serial interface for PC control.
- All parameters can be saved into 25 different label
configurations.
- Load, copy, move, and delete from memory banks.
- On screen source information that can be recalled by
means of the remote control or by means of the rear
panel button.
- On screen display ON/OFF (only for contrast,
brightness, colour, peaking and hue).