Connecting to the internet using dun, Aceview, Connecting to the – Sierra Raven EDGE User Manual
Page 137: Internet using dun, Start aceview
Windows Dial-up Networking (DUN)
Rev 3.0B Feb.08
133
Figure 3-28: Advanced TCP/IP
Tip: You may want to check the Options tab and change the settings
for applications you might be using. The default options are generally
applicable for most uses.
Caution: Unless specifically directed to do so by Support or your
network administrator, you do not need to make any changes to the
options on the Security tab.
r.
Select OK until you return to the Connect window.
Connecting to the Internet
Using DUN
There are two methods you can use to connect with Raven to
the Internet using DUN, AceView and the Windows DUN
connection directly.
AceView
AceView is a small utility which can maintain your DUN
connection and monitor the connection of your Raven to
Provider. If you have not already installed AceView you can
obtain the most recent version from the Sierra Wireless Airlink
website.
Note: The direct DUN
connection features of AceView
are not available in Windows 98
or Windows NT.
This guide assumes you have a default installation of AceView.
1. Start AceView.
Start > All Programs > AirLink Communications > AceView