Sierra Raven EDGE - Manual (Page 93)

Raven EDGE
89 20070914
Figure 1-5: AceManager : Dynamic IP
*DOMAIN=name
Domain (or domain zone) of which the Raven is a part. This
value is used during name resolutions if a fully qualified name
is not provided and also for DNS updates. This value can be
up to 20 characters long.
• name=domain name (i.e. eairlink.com)
If *DOMAIN=eairlink.com, then when ATDT@remote1 is
entered, the fully qualified name remote1.eairlink.com will be
used to perform a DNS query to resolve the name to an IP
address.
Tip: Only letters, numbers, hyphens, and periods can be used in a
domain name.
*IPMANAGERn=[name][IP address]
Sets a domain name or IP address to send IP change notifica‐
tions to. Up to two independent IP Manager servers can be set,
using either AT*IPMANAGER1 or AT*IPMANAGER2.
Updates to a server can be disabled by setting that entry to
nothing (for example, “AT*IPMANAGER1=”).
• n=1 : First IP Manager server.
• n=2 : Second IP Manager server.
• name=domain name
*IPMGRKEYn=key
Sets the 128‐bit key to use to authenticate the IP update notifi‐
cations. If the keyʹs value is all zeros, a default key will be
used. If all the bytes in the key are set to FF, then no key will be
used (i.e. the IP change notifications will not be authenticated).
AT*IPMGRKEY1 is used to set the key to use with
AT*IPMANAGER1, while AT*IPMGRKEY2 is used to the key
with AT*IPMANAGER2.
• n=1 : First IP Manager server.