Spectra Logic RXT150 - Manual (Page 10)

Chapter 2. Troubleshooting the RXT150
10
Holding the Load/Unload Button
Hold down the Load/Unload button (Figure 2-2) for approximately 15 seconds.
Note: This action causes the drive to reboot, which in turn causes a
forced eject. As a result of the reboot process, the host temporarily
loses contact with the drive.
If this operation is not successful, proceed to Using an Allen Wrench for Manual Eject
on page 11.
Figure 2-2 The Load/Unload button.
Load/Unload