Sony PDW-F70 - Manual (Page 109)

109
Troubleshooting
A
ppe
ndix
Disc Top! a) DISC TOP. This appears if you press the PREV button or conduct
a high-speed reverse search when the unit is stopped
at the start of the disc.
Use forward search or playback instead.
Disc End! a) DISC END. This appears if you press the NEXT button or conduct
a forward high-speed search when the unit is stopped
at the end of the disc.
Use reverse search or playback instead.
MAX # Files DISC CANNOT BE RECORDED TO.
FOR MORE RECORDING SPACE,
DELETE CLIPS OR NON-AV DATA.
(GENERAL FILES) Delete clips or GENERAL files.
DISC CANNOT BE RECORDED TO.FOR
MORE RECORDING SPACE, DELETE
OTHER CLIP LISTS. Delete unneeded clips, or insert a disc with enough
free space.
Disc Full! DISC FULL.FOR MORE RECORDING,
DELETE SOME CLIPS. Delete unneeded clips, or insert a disc with enough
free space.
MAX# SB CLP
b) NO MORE SUB CLIPS CAN BE ADDED
TO CLIP LIST. This appears when an attempt is made to add sub
clips when 300 sub clips have already been
registered.
Limit the creation of sub clips to 300 or fewer.
CL OVER DUR
b) DURATION OF ONE CLIP LIST MUST BE
LESS THAN 24 HOURS. This appears when you try to add a sub clip when the
total duration of sub clips in a clip list has already
reached 24 hours.
Create clip lists so that the total duration is within 24
hours.
Run Salvage EXECUTE SALVAGE PROGRAM. This appears when recording, E-E display, essence
mark recording, or sub clip addition for quick scene
selection is attempted on a disc that needs to be
salvaged.
Try again after salvaging the clips on the disc
(see
page 41).
CNT mode! a) COUNTER MODE IS SELECTED.
SET COUNTER SELECT SWITCH TO TC
OR UB. This appears when CNTR SEL on page P1 of the
function menu is set to “COUNTER”, and you try to
preset timecode or user bits.
To use timecode or user bits, set CNTR SEL to “TC”
or “UB”
(see page 82).
TC EXT!
b) TC EXTERNAL IS SELECTED.
SET TC INTERNAL MODE IN FUNCTION
MENU. This appears when TCG on page P2 of the function
menu is set to “EXT”, and you try to preset timecode
or user bits by setting TC MODE to “PRESET”.
Set TCG to “INT”
(see page 82).
REGEN mode!
a) TCG REGEN MODE IS SELECTED.
SET TC PRESET MODE IN FUNCTION
MENU. This appears when TC MODE on page P2 of the
function menu is set to “REGEN”, and you try to
preset timecode or user bits.
Set TC MODE to “PRESET”
(see page 83).
REC RUN!
a) TCG RUN MODE IS SET TO REC RUN.
SET TC FREE RUN MODE IN FUNCTION
MENU. This appears when RUN MODE on page P2 of the
function menu is set to “REC RUN”, and you try to
preset timecode or user bits.
Set RUN MODE to “FREE RUN”
(see page 83).
REC mode!
b) THUMBNAIL(S) CANNOT BE
DISPLAYED DURING RECORDING. Stop recording and try again.
CANNOT EXECUTE IN REC MODE.
DRIVE MAINTENANCE MENU CANNOT
BE EXECUTED WHILE IN REC MODE.
No SEL List b) CLIP LIST IS NOT SELECTED. This appears when you press the SUB CLIP button
while the clip list on the disc is not loaded into the
current clip list.
Load the clip list
(see page 62) and try again.
Alarm message in time
data display section Alarm message in monitor video
section Description/action