Sony PDW-F70 - Manual (Page 92)

92
System Menu
Cha
p
te
r 6
Me
nu
s
PROCESS CONTROL
[> Proc ctrl]: Separate
adjustment screens
appear for the following
items. Use the jog dial to
make settings, and press
the MENU button to return
from the adjustment
screens to the second
level of the setup menu.
VIDEO GAIN [>> V gain]:
Adjust the video output
level.
–848 [>>> –848] to 847 [>>> 847]
Factory default setting: *0 [>>> 0]
CHROMA GAIN [>> C gain]:
Adjust the chroma output
level
–848 [>>> –848] to 847 [>>> 847]
Factory default setting: *0 [>>> 0]
CHROMA PHASE [>> C
phase]: Adjust the
chroma phase.
–128 [>>> –128] to 127 [>>> 127]
Factory default setting: *0 [>>> 0]
SETUP LEVEL [>> Setup
lev]: Adjust setup level.
–272 [>>> –272] to 271 [>>> 271]
Factory default setting: *0 [>>> 0]
HD SYNC PHAS [>> HD S
PHAS]: Adjust HD sync
phase.
–2200 [>>> –2200] to 2199 [>>> 2199] (system frequency:
60i)
–2640 [>>> –2640] to 2639 [>>> 2639] (system frequency:
50i)
–2750 [>>> –2750] to 2749 [>>> 2749] (system frequency:
23.98P)
Factory default setting: *0 [>>> 0]
SD SYNC PHAS [>> SD S
PHAS]: Adjust SD sync
phase.
–1716 [>>> –1716] to 1715 [>>> 1715] (system frequency:
60i/23.98P)
–1728 [>>> -1728] to 1727 [>>> 1727] (system frequency: 50i)
Factory default setting: *0 [>>> 0]
OUTPUT SCH [>>
OutputSCH]: Adjust the
subcarrier H phase of
composite video output.
–512 [>>> –512] to 511 [>>> 511]
Factory default setting: *0 [>>> 0]
Note
Valid for serial number 11001 or higher and firmware version
1.5 or higher.
UP CONVERT [> UP
convert]: Specify
upconvert output.
AUTO SQEEZE [>> Auto
SQZ]: Select whether to
use auto squeeze mode.
* OFF [>>> OFF]: Do not use.
ON [>>> ON]: Use.
CONV MODE [>> Conv
mode]: Select the
conversion mode.
* EDGE CROP [>>> Edge Crop]: Edge crop mode
LETER BOX [>>> LetterBox]: Letter box mode
SQEEZE [>>> Squeeze]: Squeeze mode
DETAIL GAIN [>> Detail]:
Select the gain level of
the up converter image
enhancer.
* LOW [>>> Low]: Low
MID [>>> Mid]: Mid
HIGH [>>> High]: High
DOWN CONVERTER [>
Down conv]: Set up the
down converter.
CONV MODE [>> Conv
mode]: Select the
conversion mode.
Note
“SQEEZE” (squeeze mode) is
selected automatically during
recording.
* EDGE CROP [>> Edge Crop]: Edge crop mode
LETER BOX [>> LetterBox]: Letter box mode
SQEEZE [>> Squeeze]: Squeeze mode
DETAIL GAIN [>> Detail]:
Select the gain level of
the down converter
image enhancer.
* LOW [>> Low]: Low
MID [>> Mid]: Mid
HIGH [>> High]: High
CROSS COLOR [>> Cross
col]: Turn cross color
adjustment on or off.
* OFF [>>> OFF]: The image enhancer uses default settings
for cross color.
ON [>>> ON]: The image enhancer adjusts so that there are
fewer cross colors.
VIDEO CONTROL [Video]: Settings related to video
control Description