Sony PDW-F70 - Manual (Page 89)

89
System Menu
C
h
ap
te
r 6
M
enu
s
DISPLAY INFO [> DISP info]: Select the content of the
character information shown in the monitor video section
and on an external monitor.
* TIME DATA & STATUS [>> Time&STA]: Time data and the
operating mode of the unit
TIME DATA & UB [>> Time&UB]: Time data and user bits
data. However, when user bits as time data is selected,
user bits data and timecode are both displayed, in that
order.
TIME DATA & CNT [>> Time&CNT]: Time data and elapsed
recording or playback time. However, when recording/
playback time as time data is selected, recording/playback
time and timecode are both displayed, in that order.
TIME DATA & TIME [>> Time&Time]: Time data and VITC
TIME DATA & CLIP [>> Time&Clip]: Time data and clip
number
TIME DATA ONLY [>> Time]: Time data only
Time data is selected with CNTR SEL on page P1 of the
function menu.
SUB STATUS [> Sub status]: Select the supplementary
status information shown in the monitor video section and
on an external monitor.
* OFF [>> OFF]: No supplementary status information
TC MODE [>> TC mode]: Indications of the operating mode of
internal timecode generator
REMAIN [>> Remain]: Free capacity on the disc (in minute
units)
CLIP NO [>> Clp No]: Clip number
PLAYBACK REMAIN [>> PB remain]: Time from the current
playback position to the recording end position, displayed
in time data format
For details of supplementary status information displayed on
the monitor when a setting other than OFF is selected, see
“Displaying Supplementary Status Information” (page 38) in
Chapter 2.
MENU DISPLAY [> Menu DISP]: Select the type of menu
characters shown in the monitor video section and on an
external monitor.
Select while viewing characters on the MENU DISPLAY
screen.
*
WHITE (WITH BKGD): White characters on black
background
BLACK (WITH BKGD): Black characters on white background
WHITE/OUTLINE: White characters with black outline
BLACK/OUTLINE: Black characters with white outline
To return to the top level of the setup menu: Press the
MENU button.
BRIGHTNESS [> Brightness]: Adjust the brightness of the
display.
The LCD BRIGHTNESS screen appears.
Factory default setting: *55
See page 31 “Adjusting the Brightness of the LCD Panel” for
more information about how to adjust the brightness.
ALARM [> ALARM]: Select whether to display alarm
messages.
OFF [>> OFF]: In general, do not display alarm messages.
However, do display some important alarm messages.
ON(LIMITED) [>> ON(Limit)]: Display a minimum number of
alarm messages.
* ON [>> ON]: Display all alarm messages.
MENU STATUS [> Menu STAT]: Select whether or not to
display menu settings in the monitor video section of the
LCD panel and on an external monitor when DISPLAY
CONTROL >DISPLAY INFO is set to “TIME DATA &
STATUS”.
* DISABLE [>> DISABLE]: Do not display.
ENABLE [>> ENABLE]: Display (only when no disc is loaded
or during disc insertion/ejection).
See “Superimposed Text Information” (page 37) in Chapter 2
for the information that is displayed.
HD CHARA [> HD cha]: Specify whether, when CHAR SEL
on page P1 of the function menu is set to “ON”, to forcibly
turn off superimposition of text information on HD output.
OFF [>> OFF]: Forcibly turn off superimposition of text
information.
* FUNCTION MENU [>> F-MENU]: Do not forcibly turn off
superimposition of text information. (The setting of CHAR
SEL in the function menu takes priority.)
DISPLAY CONTROL [Display]: Settings related to display
on the LCD panel of this unit and on an external monitor Description