Seiko Instruments DPU-30 - Manual (Page 34)

5-6
• The second byte
00
16
through 1F
16
: The first byte already entered is ignored. Function codes are processed
as function codes. All the other codes are ignored along with the first
byte. If the following code accompanies a Kanji mode clear command,
the next received data is processed as a 1-byte character code.
20
16
: Ignored along with the first byte.
21
16
through 7E
16
: Print Kanji or user-defined characters if the first byte is one of 21
16
through 7E
16
.
7F
16
: Ignored along with the first byte.
80
16
through FE
16
: Ignored along with the first byte unless the first byte is 00
16
.
FF
16
: Ignored along with the first byte.
For the correspondence between the 2-byte codes and the printed characters, refer to “Kanji Code
Table” (as per JIS C 6226-1983).
5.4 FUNCTION CODE DESCRIPTION
This chapter describes the commands in each function by the mode.
5.4.1 Function Code Description Format
Each function code is described in the format below.
The same format is used for both Mode 1/Mode 2 and Mode 3.
X X X X X X
Indicates the command. Indicates the command name.
Code Indicates command part and parameter past.
X
16
indicates hexadecimal code.
Function Indicates the functions of the commands.
Details Explains detailed printer operation when inputting commands.