Seiko Instruments DPU-30 - Manual (Page 61)

5-33
DC3 + Print Mode of Ruled Line Approve
Code 13
16
+ 2B
16
Function Approves the print mode of the data stored in the ruled line buffer.
Details • When a printing command (CR, LF, etc.) is executed after the approval, the data
stored in the selected ruled line buffer is always included in the data to be printed.
• This command is not affected by the printing area commands such as GS L, and
GS W.
• In default, the print mode of the data stored in the ruled line buffer is prohibited.
DC3 – Print Mode of Ruled Line Prohibit
Code 13
16
+ 2D
16
Function Prohibits the print mode of the data stored in the ruled line buffer.
Details • After the print mode of the ruled line is cancelled, the data stored in the ruled line
buffer is not printed.
DC3 P 1 Dot Line of Ruled Line Print
Code 13
16
+ 50
16
Function Prints the data stored in the print buffer and 1 dot line of the data in the selected
ruled line buffer.
Details • Even if no data exists in the print buffer, 1 dot line of the data in the selected ruled
line buffer is printed.
• If the print mode of the data stored in the ruled line buffer is prohibited, none of
the data is printed.