Seiko Instruments DPU-30 - Manual (Page 44)

5-16
3. Form commands
ESC 2 Default Amount of Line Spacing Specify
Code 1B
16
+ 32
16
Function Restores the amount of paper feed for one line to its default value.
ESC 3 n Amount of Line Spacing Set
Code 1B
16
+ 33
16
+ n
Domain of
function
0 ≤ n ≤ 255
Function Sets the amount of paper feed for one line at [n × dot pitch].
Details • The default amount of paper feed for one line, n = 28.
ESC SP n Standard Size Character Right Spacing Set
Code 1B
16
+ 20
16
+ n
Domain of
function
0 ≤ n ≤ 127
Function Sets the character spacing for standard size character at [n × dot pitch].
Details • The right character spacing increases depending on the horizontal scaling factor.
• This command does not affect kanji.
• In default, n = 0.