Smart Technologies 3000i - Manual (Page 11)

3000i Installation Guide
3
SMART Pen Tray Features
Using a Pen Tray Stylus
To write on top of the computer image, just
pick up a stylus from the Pen Tray and
write on the interactive whiteboard.
To write in a different color, place the
current stylus back in its slot and select
another. Since color recognition comes from
the slots in the Pen Tray rather than the
styluses themselves, you must ensure that
each stylus is returned to its proper slot (the
slot with the corresponding color) when you
finish using it.
You also have the option of changing any or
all of these styluses to highlighters,
assigning one of 16 colors to them, or
altering their width. You can also change the
size of the area erased by the Pen Tray
eraser.
To reconfigure the styluses or eraser, click
on the interactive whiteboard driver icon in
the system tray, select Control Panel, and
click on the Pen Tray tab.
Using the Pen Tray Buttons
Press the top Pen Tray button to make the
SMART Keyboard appear for on-screen typing
and handwriting recognition. Press the bottom
button to make the next contact with the
interactive whiteboard a right-mouse click.
You can reconfigure these default behaviors
so that either button can initiate any of the
following events:
• Print the current page
• Move to the preceding or the following
Notebook file page
• Clear all annotations from the current
page
• Produce a floating mouse
To reconfigure the Pen Tray buttons, click on
the SMART Board icon in the system tray,
select Control Panel, and click on the Pen
Tray tab.
Eraser
Black Stylus
Blue Stylus
Red Stylus
Green Stylus
Pen Tray Buttons
Keyboard Button
Right-Mouse Button