Smart Technologies 3000i User Manual
Page 46
3000i Installation Guide
38
2
Facing the front of the cabinet, pull the bottom of the screen out slightly and disconnect
the MOD4 cable (connecting the interactive whiteboard to the Pen Tray) from the mini-
RJ11 socket. You'll find this cable underneath the bottom edge of the screen, in the
center.
3
With one person on each side, grasp the screen by the top and bottom corners. Lift the
screen up and then out to free it from the two keyhole slots that support it. Set the
screen down in a safe location.
WARNING: Never touch the back of the screen. If you do smudge this surface,
lightly spray alcohol-free glass cleaner on a soft cloth and dab the affected area to
remove the marks. Never apply isopropyl alcohol, water or acetone, as these fluids
can damage the diffusion coating and permanently reduce the display quality.
Socket
Bezel
MOD4 Cable