Smart Technologies 3000i - Manual (Page 4)

Important Information ii
4 If cabinet assembly is required, we strongly recommend that at least two people perform this
task.
5 Do not touch the rear surface of the interactive whiteboard or apply isopropyl alcohol,
water or acetone. If any of these fluids come into contact with this surface, the diffusion
coating on the rear of the interactive whiteboard could be damaged, resulting in a
permanent deterioration in display quality.
6 If you inadvertently smudge the rear surface of the interactive whiteboard, wipe it carefully
with a soft cloth and alcohol-free glass cleaner. Do not spray the glass cleaner directly
onto the surface; spray it lightly on the cloth, and then gently dab the rear surface of the
interactive whiteboard until the marks are removed.
7 Avoid setting up and using the 3000i in an area with excessive levels of dust, humidity and
cigarette smoke.
8 Lock the casters after you set up the cabinet, so it remains stationary while in use.
9 Avoid exposing the 3000i to extreme heat or cold. The operating temperature range is
from 41ºF to 85ºF (5ºC to 29ºC) with up to 80% humidity (non-condensing). The shipping
and storage range is from -4ºF to 95ºF (-20ºC to 35ºC) with up to 80% humidity (non-
condensing).
10 Unplug the cabinet during electrical storms or if you won't use it for an extended period of
time.
11 This product is equipped with a three-wire grounding-type plug. This plug will only fit into a
grounding-type power outlet. If you are unable to insert the plug into the outlet, have your
electrician replace the obsolete outlet. Do not circumvent the safety features of the
grounding-type plug.
12 Handle the power cord carefully and avoid excessive bending. Route the power cord so its
unlikely to be walked on or pinched by items placed upon or against it. Do not modify the
power cord.
13 If you require replacement parts, ensure the service technician uses the replacement parts
specified by SMART Technologies Inc. or parts with the same characteristics as the
original.
Cleaning the Cabinet Components and Mirrors
Periodically dust mirrors and cabinet components using a soft cloth. You can clean all the mirrors
using a standard, alcohol-free glass cleaner and a soft cloth.
Before you clean the interactive whiteboard, log off the computer. If you touch the screen when
the computer is in any other state (e.g., with a program open or at the desktop), pressure applied
to the screen will activate program components or scramble desktop icons. We therefore
recommend that you first log off, and then put the projector into standby mode to view dirt and
streaks more effectively. To clean the writing surface of the interactive whiteboard, use a standard
glass cleaner. Just spray the board with cleaning fluid and wipe with a paper towel.
Remove marks made with a permanent marker by completely covering them with the ink from a
dry-erase marker (not a low-odor marker). Then wipe with a soft cloth. Dry-erase ink contains
solvents that work to remove permanent ink. If any trace of the original permanent ink remains,
spray the area with standard glass or whiteboard cleaner and wipe clean.
The back of the interactive whiteboard screen is well protected from handling by its location on the
inside of the cabinet. However, if it must be dusted, or if a mark has been made on its surface,
wipe it gently with a soft cloth and standard alcohol-free glass cleaner.