Smart Technologies 3000i - Manual (Page 3)

Important Information i
Important Information
Please read this manual carefully before setting up and using the Rear Projection SMART Board 
3000i interactive whiteboard. With proper care, your 3000i should provide years of trouble-free
service.
Other Warnings and Safety Precautions
For operating safety and to avoid damage to the unit, follow these instructions.
1 Move the cabinet with care. Quick stops, excessive force and uneven surfaces can overturn
the cabinet.
2 When you transport the 3000i, only ship the cabinet in the upright position. In addition, never
lay the interactive whiteboard face down.
3 If you transport the 3000i over a distance, we strongly urge you to completely repackage it
using the original packaging. This packaging for the 3000i was designed with optimal shock
and vibration protection. If the original packaging is no longer available, pack all components
with as much padding as reasonably possible to ensure that they are not exposed to
excessive vibration or shock.
WARNING
The projector inside the 3000i cabinet is a high-brightness light source. Do not stare into the
beam of light or view it directly. Be especially careful that children do not stare directly into the
beam of light.
WARNING
To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
WARNING for European Customers
The 3000i should only be used with European TN and TT power distribution systems.
The 3000i is not suitable for older, IT-type power distribution systems found in some European
countries.
“This system (IT-type) is widely used isolated from earth, in some installations in
France, with impedance to earth, at 230/400V, and in Norway, with voltage limiter, neutral not
distributed, at 230V line-to-line.” (IEC 60950:1999
)
Contact qualified personnel if you're uncertain of the type of power system available where the
3000i is to be installed.