Smart Technologies 3000i - Manual (Page 49)

3000i Installation Guide
41
4 Disconnect all cables from the projector.
NOTE: The projector cables are labeled so these can connections can be easily
restored (see page 42).
5 Pull the projector straps up and over the projector (through the projector handle) to get
them out of the way.
6 Slide the projector as close to the front of the cabinet as possible (within the keyhole
slots).
7 Lift the projector up so the three adjustment screws pass through the keyhole slots.
Thumbscrew x 3
Keyhole x 3