Sony SLV-AV100UX - Manual (Page 32)

Basic VCR Operations 32
Basic VCR Operations
Playing a video tape
MASTER VOLUME
1 2 3
4 5 6
7 8 9
0 >10
Tips
• The unit turns on if you
insert a tape while the
power is off.
• The counter resets to
“0H00M00S” whenever a
tape is inserted.
Notes
• The unit’s sound won’t be
reproduced through the TV
unless the speaker
connectors or TAPE/MD
REC OUT jacks are
connected to the TV.
Normally, the speakers
connected to the unit
reproduce the sound.
6 EJECT
MASTER VOL
+/–
0 R E W
) F F
P PAUSE
· P L AY
p STOP
To
Stop play
Pause play
Resume play after pause
Search forward
Search backward
Fast-forward the tape
Rewind the tape
Eject the tape
When your TV is
PAL only
PAL and NTSC
To play an NTSC-recorded tape
Set NTSC PB on the rear of the unit according to the colour system of
your TV.
Set NTSC PB to
ON PAL TV
NTSC 4.43
Press
p STOP
P PAUSE
P PAUSE or · PLAY
During playback, press and hold ) FF.
To resume normal playback, release the button.
During playback, press and hold 0 REW.
To resume normal playback, release the button.
) FF during stop
0 REW during stop
6 EJECT
Before you start...
• Turn MASTER VOLUME to the leftmost position (0) to avoid
damaging your speakers.
1
Press VHS TUNER.
• If the TV doesn’t turn on, turn it on
manually.
Press VHS TUNER again if connected
with a EURO-AV (Scart) cable.
• If connected with a EURO-AV (Scart)
cable, the TV is automatically set to
VCR reception.
• If connected with only the antenna
cable, set the TV to the VCR’s
programme position manually.
2
Insert a video tape.
The unit’s VCR starts playing
automatically if you insert a tape with
its safety tab removed.
3
Press · PLAY.
When the tape reaches the end, it will
rewind automatically.
4
Press MASTER VOL +/– on the
remote commander to adjust the
volume.
Additional tasks