Sony SLV-AV100UX - Manual (Page 33)

33 Basic VCR Operations
• Depending on your TV, the
following may occur while
playing an NTSC-recorded
tape:
– The picture is played back
in black and white.
– The picture shakes.
– No picture appears on the
TV screen.
– Black horizontal streaks
appear on the TV screen.
– The colour density
increases or decreases.
• If you play back a tape in
LP or EP mode with the
NTSC system, the sound is
monaural.
• The counter stops counting
when it comes to an
unrecorded portion.
To use the time counter
At the point on the tape that you want to find later, press COUNTER
RESET. The counter in the display window resets to “0H00M00S.” To
rewind or fast-forward to the “0H00M00S” point, press TAPE RETURN
on the unit.
To display the time counter on the TV screen, press DISPLAY.
To change the information in the display window
Press STATUS repeatedly.
Each press changes the indication in the following way:
Current time n Counter n Operating function n Sound field
(See page 34 and 61.)
Regardless of the selected indication, the operational function and
selected sound field appears in the display window momentarily. To
display only the indication selected with the STATUS button, set
INDICATION in the SET UP MENU to OFF (see page 76).
To mute the sound
Press MUTING on the remote commander or unit. The muting mark
appears on the TV screen if the on-screen display function is on, and the
MASTER VOLUME indicator on the unit flashes.
To restore the sound, press MUTING again.
n
H M S
MASTER VOLUME indicator
Note
• If the muting mark doesn’t
appear on the TV screen,
press DISPLAY.