Controlling an md deck, Customizing the remote commander for an md deck, Playing an md – Sony SLV-AV100UX User Manual
Page 57
57
Audio/Video Equipment Operations
Controlling an MD
deck
continued
1
2
3
4
5
6
7
8
9
0
>10
Number
buttons/>10
=
/
+
A M S
)
F F /
0
R E W
P
PAUSE
p
STOP
·
P L A Y
r
R E C
Customizing the remote commander for an MD
deck
The remote commander is not factory set to control MD decks. So you
need to customize the function button corresponding to the jacks the
MD deck is connected to. For example, if you connect the MD deck to
the TAPE/MD jacks, customize TAPE/MD for the MD deck in the
following way.
While pressing the function button (e.g. TAPE/MD), press number
button 3.
The function button is customized to control the MD deck.
You can customize the VIDEO 1, VIDEO 2, CD, TAPE/MD, or TV
function buttons. To change the button’s function again, see
“Customizing the remote commander function buttons” on page 80.
Playing an MD
1 Press the function button you customized for the MD deck, and turn
on the MD deck.
The unit turns on and switches the input source to the jacks the MD
deck is connected to.
2 Insert an MD referring to your MD deck’s operating instructions.
3 Press
·
PLAY.
The MD deck starts playing.
Additional tasks
To
Stop play
Pause play
Resume play after pause
Scan forward or backward
Locate the beginning of other
tracks
To locate a track with the number buttons
Press one of the number buttons for single digit numbers (except 0). To
locate the 10th track, press 1, then 0.
To enter a track number over 10, first press >10, then any number button
for the tens digit except 0, and the number button for the ones digit.
Examples of entering the two-digit number
To
Press
Enter 30
>10, then 3, and 0
Enter 24
>10, then 2, and 4
Press
p
STOP
P
PAUSE
P
PAUSE or
·
PLAY
And hold
)
FF or
0
REW during
playback
=
/
+
A M S r e p e a t e d l y
(