Sony SLV-AV100UX - Manual (Page 78)

Editing 78
Audio dubbing
This feature lets you record over the normal audio track. The monaural
sound previously recorded is replaced while the original hi-fi sound
remains unchanged. Use this feature to add music to a tape you have
recorded with a camcorder.
Before you start dubbing…
• Press VHS TUNER.
– If the TV doesn’t turn on, turn it on manually.
Press VHS TUNER again if connected with a EURO-AV (Scart)
cable.
– If connected with a EURO-AV (Scart) cable, the TV is automatically
set to VCR reception.
– If connected with only the antenna cable, set the TV to the VCR’s
programme position manually.
• Do not use the remote commander in the following procedure.
1
Insert a prerecorded tape with its
safety tab in place into this
(recording) VCR.
Search for the end of the section
to be dubbed and press
P PAUSE.
2
Press COUNTER RESET on this unit
to reset the counter to
“0H00M00S.”
3
Rewind the prerecorded tape to
the beginning of the section to be
dubbed.
The unit’s VCR pauses.
4
Insert a source tape, MD, CD, etc.
into the playback component
connected to the unit.
5
Press AUDIO repeatedly to select
the input (playback) source.
6
Search for the point to start
playback and set it to playback
pause.
7
Press AUDIO DUB.
The audio dubbing indicator appears
in the display window.
AUDIO
P PAUSE AUDIO
DUB COUNTER
RESET