Sony SLV-AV100UX - Manual (Page 6)

Getting Started 6
Connecting the unit and TV
Step 3
Before you connect...
• Turn off the power on the TV.
• Do not connect the mains lead until you finish all the connections through “Step 5 :
Connecting various audio/video equipment” on page 10.
• Be sure to make connections firmly to avoid hum and noise.
: Signal flow
EURO-AV
(Scart)
RF MODULATOR
AERIAL IN
AERIAL OUT
VMC-2121 EURO-AV cable (not supplied)
AERIAL IN
Aerial cable
1
Disconnect the aerial cable from your
TV and connect it to AERIAL IN on the
rear panel of the unit.
2
Connect AERIAL OUT on the unit and the
aerial input on your TV using the
supplied aerial cable.
3
Connect VIDEO OUT (EURO-AV) on the
unit and the EURO-AV (Scart) connector
on the TV.
4
Set RF MODULATOR to OFF.
Whenever you want to watch the unit’s VCR
picture, press VHS TUNER to turn on the unit
and TV. And the TV is automatically set to
VCR reception.
OUT
IN
AERIAL
OUT
IN
AERIAL
EURO AV
VIDEO OUT
OFF ON
RF MODULATOR
VIDEO OUT
(EURO-AV)