Sterling SXS Series User Manual
Page 20
BJ5-620
Chapter 2: Functional Description
20 of 73
V-Belts and Ram Guards
V-belt and ram guards are bolted to the machine. They can be dismounted for
installation and maintenance work when all rotating parts have come to a
complete standstill and the machine is electronically locked out.
NOTE: The operator must fit and mount the protective devices delivered with
the machine according to the current legal safety regulations if the
machine is delivered without drive motors upon customer request.
Safety Markings
Safety markings are attached to the machine. Should one of these markings
becomes detached or is no longer recognizable, it must be replaced. New safety
markings can be ordered through safety signage providers or from the
manufacturer.
Personal Protective Gear
Wear close-fitting clothing. Hair must be pulled back, and loose fitting jewelry
is prohibited. (See table below for more details.)
(1) Ram guarding
(2) V-belt guarding
1
2