Sterling SXS Series - Manual (Page 28)

BJ5-620 Operation 28 of 73
• Throw the material into the in-feed hopper.
• The machine should be fed from the front.
• If your machine has an additional in-feed device installed, please observe the
additional information for working with the in-feed device.
DANGER! Do not climb into the in-feed hopper while operating the
machine. Death will result.
Emptying the Screen
1. Switch off the shredder at the main switch.
2. Safeguard main switch using a padlock.
3. Open the machine door.
4. Safeguard machine door.
5. Pivot the screen support downwards by pushing the button screen open on the control
box.
6. Remove the screen.
7. Empty the screen.
8. Put the screen back into the screen support.
9. Pivot the screen support into the working position and fasten using the mounting
screws.
10. Close the machine.
11. Shredder can be started again.
(1) Hydraulic cylinder
(2) Screen support
(3) Screen
(4) Rotor
3
1
2
4