Star Micronics DOT MATRIX PRINTER SP2000 - Manual (Page 12)

10
FUNCTION Selects IBM character set #2
CODE <ESC> "6"
(1B)H (36)H
OUTLINE Selects IBM character set #2.
Switches from IBM character set #1 to character set #2.
Subsequent 80H to 9FH codes are handled as character data.
This command is invalid when the character code table settings
are other than #1.
FUNCTION Selects IBM character set #1
CODE <ESC> "7"
(1B)H (37)H
OUTLINE Selects IBM character set #1.
Switches from IBM character set #2 to character set #1.
Subsequent 80H to 9FH codes are handled as character data.
This command is invalid when the character code table settings
are other than #2.
FUNCTION Selects 7 X 9 (half dot) font (Default)
CODE <ESC> "M"
(1B)H (4D)H
OUTLINE Selects 7 X 9 (half dot) font.
When the power of the printer is turned on, 7 X 9 (half dot)
printing is automatically selected.
The number of digits per line is set by the DIP switches in the
following way.
DSW 1 - 5 Digits Per Line
ON 42
OFF 40
(When right space of character is 0.)