Star Micronics DOT MATRIX PRINTER SP2000 - Manual (Page 16)

14
FUNCTION Cancels upperlining (Default)
CODE <ESC> "_" "0" or <ESC> "_" <0>
(1B)H (5F)H (30)H or (1B)H (5F)H (00)H
OUTLINE Cancels upperline mode.
FUNCTION Selects red color printing (SP2360/2560)
Selects highlight printing (SP2320/2520)
CODE <ESC> "4"
(1B)H (34)H
OUTLINE (SP2360/2560) Specifies red printing
Prints subsequent characters in red. You can print both read and
black characters on the same line.
Unidirectional when switching red and black.
(SP2320/2520) Specifies black and white inverted printing
Inverts black and white and prints subsequent characters
including the character pitch. Printing is unidirectional. Do not
use when ANK font setting is 5 X 9 (3P = 1). (Printing quality is
not guaranteed with 5 X 9 (3P = 1)).
FUNCTION Cancels red color printing (SP2360/2560)
Cancel highlighted print mode (SP2320/2520)
CODE <ESC> "5"
(1B)H (35)H
OUTLINE (SP2360/2560) Cancels red color printing and prints subsequent
characters in black.
(SP2320/2520) Cancels highlighted printing. (Default)
FUNCTION Inverted printing
CODE <SI>
(0F)H
OUTLINE Data following this code is printed out in inverted characters. This
code is valid only when input at the beginning of a line, so, normal
and inverted characters cannot be mixed in on the same line.