Star Micronics DOT MATRIX PRINTER SP2000 - Manual (Page 20)

18
FUNCTION Carriage return
CODE <CR>
(0D)H
OUTLINE The <CR> code is valid when the memory switch 3-1 = 1 (set to 0
at exfactory). When the <CR> code is valid, setting the memory
switch 3-0 will cause the <CR> to function as shown in the table
below.
Memory Switch Setting <CR> Code Function
MSW 3-1 = 0 Ignored (at exfactory)
MSW 3-1 = 1
MSW 3-0 = 0 Same as <LF>
MSW 3-0 = 1 Prints only. No paper feed
FUNCTION Feed paper n lines
CODE <ESC> "a" n
(1B)H (61)H n
1
<
=
n
<
=
127
OUTLINE After data in the line buffer is printed out, feeds the paper n lines.
FUNCTION Horizontal tab
CODE <HT>
(09)H
OUTLINE The print position skips to the next horizontal tab position in line.
If the current position is after the final horizontal tab position that
can be executed, this code is ignored. (Underlining and overlining
do not take place in the spaces between characters set with the
horizontal tab function.)