Star Micronics DOT MATRIX PRINTER SP2000 - Manual (Page 34)

32
FUNCTION Controls peripheral device #1 immediately
CODE <FS>
(1C)H
OUTLINE Executes drive pulse for peripheral unit 1 (immediate).
This code differs from the <BEL> code as follows:
When the printer receives an <FS> code, the command is
executed immediately. The <BEL> code is stored in the data
buffer in the same manner as other codes, and executed in the
order in which they are received.
Immediate drive command for peripheral unit 2
NOTE Peripheral Units 1 and 2 cannot be driven simultaneously.
FUNCTION Controls peripheral device #2 immediately
CODE <EM>
(19)H
OUTLINE Drives peripheral unit 2. Pulse width is fixed at 200 ms with a
fixed delay time of 200 ms.
When the printer receives a <EM> code, the command is
executed immediately. Same as <SUB>.
NOTE Peripheral Units 1 and 2 cannot be driven simultaneously.
FUNCTION Controls peripheral device #2 immediately
CODE <SUB>
(1A)H
OUTLINE Drives peripheral unit 2. Pulse width is fixed at 200ms with a fixed
delay time of 200 ms.
When the printer receives a <SUB> code, the command is
executed immediately. Same as <EM>
NOTE Peripheral Units 1 and 2 cannot be driven simultaneously.