Star Micronics DOT MATRIX PRINTER SP2000 - Manual (Page 28)

26
First, since the volume of data is 30, n1 = (1E)H. If the data m1 to
m30 is converted to hexadecimal, it appears as shown below.
Print Sample
FUNCTION 8 dot high density graphics
CODE <ESC> "L" n1 n2 m1 m2...
(1B)H (4C)H n1 n2 m1 m2...
DEFINITION RANGE 1
<
=
n1 + 256 X n2
<
=
420 (DIP SW 1-5 = ON))
1
<
=
n1 + 256 X n2
<
=
400 (DIP SW 1-5 = OFF)
OUTLINE Executes double density bit image printing (half-dot printing)
determined by "n1" and "n2". The total number of bit image data
bytes in one line is equal to n1 + n2 X 256. Refer to <ESC> K as
to the relation between the dot position and the bit number. The
printer ignores any data bytes over the specified amount allowed
in one line. Pringing is uni-directional.
The printer does not print adjacent dots. When the bit image
printing is finished, the printer automatically returns to the
character mode.
Data Binary Hex
m1 00000001 01
m2 00011110 1E
m3 00111110 3E
m4 01011111 5F
m5 00011111 1F
m6 01011110 5E
m7 00011110 1E
m8 00111111 3F
m9 00101111 2F
m10 00111110 3E
Data Binary Hex
m11 00111110 3E
m12 00000010 02
m13 00000010 02
m14 00111110 3E
m15 00111110 3E
m16 00101111 2F
m17 00101111 2F
m18 00111110 3E
m19 00101110 2E
m20 00101110 2E
Data Binary Hex
m21 00111110 3E
m22 00101110 2E
m23 00101110 2E
m24 00111110 3E
m25 00101111 2F
m26 00101111 2F
m27 00111110 3E
m28 00111110 3E
m29 00000010 02
m30 00000010 02