Sun Microsystems STOREDGE FC-100 - Manual (Page 20)

1-2 Sun StorEdge FC-100 Hub Installation and Service Manual • September 1998
Data transfer within the hub is implemented in serial differential Positive Emitter
Coupled Logic (PECL) AC coupled logic. Each port monitors the serial data input
stream as well as the media converter connected to it.
Initiators or targets on the loop represent individual nodes that are linked by the
shared Fibre Channel loop. The positioning of the initiators or targets on the loop
depends upon the requirements of your application.
The front and rear of the hub are shown in FIGURE 1-1 and FIGURE 1-2 .
FIGURE 1-1 Front of Hub
FIGURE 1-2 Rear of Hub
AC power LED
AC power
connector Port 0 Port 1 Port 2 Port 4 Port 5 Port 3 Port 6
Bypass LED (yellow)
Active LED (green)