Sun Microsystems STOREDGE FC-100 - Manual (Page 36)

3-6 Sun StorEdge FC-100 Hub Installation and Service Manual • September 1998
3.3 Removing a Hub
1. Disconnect and remove any installed fiber optic cables or GBICs ( FIGURE 3-3 ).
2. Disconnect the AC power cord from the hub.
3. Push up on the retaining tab that secures the hub to the mounting tray
( FIGURE 3-5 ).
FIGURE 3-5 Removing the Hub
4. Pull the hub back and then lift it out of the mounting slots.
Position A
Position B
Notch
Retaining tab