Sun Microsystems STOREDGE FC-100 - Manual (Page 26)

2-4 Sun StorEdge FC-100 Hub Installation and Service Manual • September 1998
2.3.4 Installing the Hub on the Mounting Tray
1. Determine on which side of the tray you are going to install the hub.
The first hub goes in position A; the second goes in position B.
2. From the rear of the tray, slide the hub mounting bracket into the slots in the
mounting tray ( FIGURE 2-2 )
You should hear a click as the black plastic retaining tab goes through the notch in
the tray.
FIGURE 2-2 Installing the Hub on a Mounting Tray
Note – The front and rear mounting plastics are interchangeable.
Position A
Position B
Notch
Retaining tab