Sun Microsystems STOREDGE FC-100 - Manual (Page 34)

3-4 Sun StorEdge FC-100 Hub Installation and Service Manual • September 1998
3.2 Removing a GBIC
1. Disconnect the fiber optic cable from the GBIC ( FIGURE 3-3 or FIGURE 3-4 ).
2. Remove the GBIC.
Sun currently ships two types of GBICs: one with a bailed locking mechanism and
one without.
■ To remove a GBIC that does not have a bail, push the module tabs together and
pull the GBIC out from the port.
FIGURE 3-3 Removing a GBIC That Does Not Have a Bail
Tab
Tab