Installation, 1 inspecting the hub, Unpack the hub – Sun Microsystems STOREDGE FC-100 User Manual
Page 23: Inspect the hub for evidence of damage, Save the packing materials for future use, 2 rackmount placement, Inspecting the hub, Rackmount placement
2-1
C H A P T E R
2
Installation
This chapter describes how to install the hub in a cabinet.
2.1
Inspecting the Hub
1. Unpack the hub.
2. Inspect the hub for evidence of damage.
If damaged, keep all contents and packing materials for the carrier’s agent to
inspect.
3. Save the packing materials for future use.
2.2
Rackmount Placement
Rackmount placement information for the hub, as well as other devices that can be
mounted in Sun system and expansion cabinets, is now available through the Web
at:
http://docs.sun.com
Click on “Storage and Peripherals” in the Hardware section and open the Rackmount
Placement Matrix.
If you do not have access to the Web, contact your Sun service provider.
Retrieve the placement information for the disk array before beginning the
installation.