Siemens Plant Central Clock TC100 User Manual
Page 45
Configuration Tool
7-4
©
Siemens AG 2010 All Rights Reserved
SICLOCK
®
TC100 Operating Instructions
Preconditions
PC
•
Minimum screen resolution of 1280x1024
•
Java Runtime of at least V1.4.0 or higher
•
Web browser, e.g. Microsoft Internet Explorer
•
Connection with the Ethernet port on the device
SICLOCK TC100
•
Assignment of an IP address to the device
A valid IP address must be assigned to the Ethernet port of the device. The
device is supplied with the address 192.168.1.10 and subnet mask
255.255.255.0. See also Network settings on the device (Chapter 8.2.2).
The PC and device must be in the same subnetwork.
Parameters, entries and lists
A parameter is defined as a group of related values. Each of these values is ter-
med an entry in its parameter.
Similar parameters can form a list. Such lists are indicated by [ ].
Parameters are identified by their unique parameter number. The parameter
number always has three parts, e.g. 0.05.12.
Example: parameter /Display/Display (0.10.01) with the entries "Language" and
"Time":
Figure 7-2 Parameter display
Notice
Entries can be individually edited, but not individually read or written. A parameter
is always read or written with all its entries. If it is a list, the complete list is read or
written.