Siemens Plant Central Clock TC100 - Manual (Page 50)

Configuration Tool
7-4 © Siemens AG 2010 All Rights Reserved
SICLOCK ® TC100 Operating Instructions
7.2.1 Connect / disconnect online connection
How to establish an online connection to the SICLOCK TC100:
1. Enter the IP address of the device in the toolbar.:
2. Start establishing the connection by clicking the icon next to the IP
address field.
−> The Configuration Tool changes into online mode:
How to terminate the online connection to the SICLOCK TC100:
1. Click next to the IP address field.
−> The Configuration Tool changes into offline mode:
Confirm all events
Acknowledges all pending events
In online mode, an acknowledgment for all pending events is sent to the
device. An acknowledgment is made, even if the cause of the event is still
pending. This enables, e.g., persistent alarms to be deactivated.
Ignore event
Rejects the pending event
The event display is deleted without interaction with the device.
Table 7-2 Possible operations and displays in the toolbar of the Configuration Tool
Field / button Meaning / instruction
Note
The connection to the device is terminated after about two hours without operator
input.