Siemens Plant Central Clock TC100 - Manual (Page 47)

Configuration Tool
7-4  © Siemens AG 2010 All Rights Reserved
SICLOCK ® TC100 Operating Instructions
7.1 Menus
Table 7-1 Menus in the Configuration Tool
Menu / function Meaning / note
File
Open Loads a parameter assignment/an archive from the local file system
See also General functions (Chapter 7.2).
Save Saves a parameter assignment/an archive to a local file system
See also General functions General functions (Chapter 7.2).
End Exits application
Link See also Connect / disconnect online connection (Chapter 7.2.1).
Connect Connects to a device
Disconnect Disconnects from a device
Data transfer
(online connection required) See also Connect / disconnect online connection (Chapter 7.2.1).
Download parameters
from device Loads all parameters from a connected device onto the PC
See also Parameters (Chapter 7.3).
Update the parameters
from the device Updates all the parameters so far loaded on the PC with the values
from the connected device
See also Parameters (Chapter 7.3).
Upload parameters to
the device Writes all parameter from the PC into the connected device
See also Parameters (Chapter 7.3).
Download archive Loads the complete archive from the connected device onto the PC
See also Archive (Chapter 7.4).
Update archive Requests/updates the archive of a connected device
See also Archive (Chapter 7.4).
View
Parameters Changes to parameter view
See also Parameters (Chapter 7.3).
Archive/events Changes to the archive/events view
See also Archive (Chapter 7.4).
Language Selects one of the languages available for the user interface
Depending on the version, more languages could be offered for
selection:
• English (standard language)
• German
The language/naming of parameters and archives are supplied by the
device. Provided that the device recognizes the language set in the
Configuration Tool, the parameters and archives will be displayed in this
language. If the device does not recognize the language, the display will
be in the standard language.