Sony KL-X9200U - Manual (Page 10)

10 -GB Getting Started
For customers using Windows 95/98
To maximize the potential of your monitor, install the
new model information file from the supplied
Windows Monitor Information Disk onto your
computer.
This monitor complies with the “VESA DDC” Plug &
Play standard. If your computer/graphic board
complies with DDC, select “Plug & Play Monitor
(VESA DDC)” or this monitor’s model name as the
monitor type in the “Control Panel” of Windows 95/
98. If your computer/graphic board has difficulty
communicating with this monitor, load the Windows
Monitor Information Disk and select this monitor’s
model name as the monitor type.
For customers using Windows NT4.0
Monitor setup in Windows NT4.0 is different from
Windows 95/98 and does not involve the selection of
monitor type. Refer to the Windows NT4.0 instruction
manual for further details on adjusting the resolution,
refresh rate, and number of colors.
Adjusting the monitor’s resolution and
color number
Adjust the monitor‘s resolution and color number by
referring to your computer’s instruction manual. The
color number may vary according to your computer or
video board. The color palette setting and the actual
number of colors are as follows:
• High Color (16 bit) n 65,536 colors
• True Color (24 bit) n about 16.77 million colors
In true color mode (24 bit), speed may be slower.
Connecting another monitor
This monitor outputs the signal input from the RGB 1
IN or RGB 2 IN connector through the RGB OUT
connector, and can display the picture on another
monitor.
See pages 7 and 8 for connecting a computer.
Rear of the monitor
Computer
to RGB IN
See pages 7 and 8 for
connecting a
computer.
to AUDIO R/L to RGB OUT
Connection varies
according to the
type of RGB input
connector on the
other monitor.
For details, see the
operating
instructions
supplied with the
monitor.
to audio input to RGB input
Another monitor
RGB
RGB OUT
RGB 1 IN
R L
AUDIO
R L
AUDIO
RGB
Note
When connecting another monitor, the picture’s centering may
change. If this happens, adjust the centering of the second
monitor.