Sony KL-X9200U - Manual (Page 17)

Operations
GB
17 -GB
The CENTER adjustment screen automatically
disappears after about 80 seconds if you do not press
any button. You can also erase the CENTER adjustment
screen by pressing MENU.
To reset to the factory preset setting
Press RESET on the monitor while the CENTER
adjustment screen is displayed. For details, see page 26.
Notes
• You cannot use this function for the input from VIDEO 1/2/3
IN and COMPONENT IN.
• You can operate the menu using the √/◊/ı/∫ and the ENTER
buttons inside the drop-down panel on the front of the
monitor.
Adjusting the picture size (SIZE)
After projecting the picture from a computer, you may
need to adjust the picture size to fit the monitor screen.
The setting is only for the input signal displayed on the
screen.
1
Press MENU.
2
Press v or V to select “ (SIZE),” and press
ENTER.
3
Press B or b to adjust the picture size.
The SIZE adjustment screen automatically disappears
after about 80 seconds if you do not press any button.
You can also erase the SIZE adjustment screen by
pressing MENU again.
To reset to the factory preset setting
Press RESET on the monitor while the SIZE adjustment
screen is displayed. For details, see page 26.
Notes
• If a signal with resolution of 640
Ч
350, 640
Ч
400 or 720
×
400,
or Wide Resolution signal is input, the picture will be enlarged
to fill the screen but will appear lengthened vertically.
• You cannot use this function for the input from VIDEO 1/2/3
IN and COMPONENT IN.
• You can operate the menu using the √/◊/ı/∫ and the ENTER
buttons inside the drop-down panel on the front of the
monitor.
b: to increase horizontal size
B: to decrease horizontal size
MENU ENTER
ENTER
MENU
S I Z E
EX I T