Sony KL-X9200U - Manual (Page 6)

6 -GB Getting Started
For customers in Japan and the U.S.
only
Using the support belts (not supplied)
You can also use the BLT-R10 support belt for the
monitor stand (not supplied) to secure the monitor.
We recommend you use the SU-90 monitor stand with
which the support belts are supplied.
About the SU-90 monitor stand (not supplied)
The dimensions of the stand are 1,050 x 700 x 630 mm
(41
3 /
8
x 27 5 /
8
x 24 7 /
8
inches) (width/height/depth).
Before you purchase this stand, refer to the dimensions
above and check the size of the area where the stand
will be installed.
Customers in Japan should use the stand SU-90T.
Customers in the U.S. should use the stand SU-90U.
Stabilizing the monitor
Using the brackets
After setting up, secure the monitor to a wall, etc. with
the supplied brackets.
1
Mount the two supplied brackets with the
screws to the upper rear sides of the
monitor.
2
Pass a strong cord or a chain through each
bracket mounted in step 1, and then secure
it to a wall or a pillar, etc.
Bracket (supplied)
Rear
Front