Sony KL-X9200U - Manual (Page 15)

Operations
GB
15 -GB
1
If the STANDBY indicator on the front of
the monitor is lit in orange, press
1 /u
(power) on the remote control to turn on
the power.
Press the u (power) switch on the monitor if the
STANDBY indicator is not lit.
The green u (power) indicator flashes, then lights
up.
2
Turn on the power of the connected
equipment.
3
Press RGB, VIDEO or COMPONENT on the
remote control or the monitor to select the
input you want to watch.
The selected input indication is displayed on the
screen.
To watch a computer picture input from the
RGB 1/2 IN connector
Each time you press RGB, the display changes as
follows:
RGB 1 ˜ RGB 2
To watch a video picture input from the
VIDEO 1/2/3 IN jacks
Each time your press VIDEO, the display changes
as follows:
VIDEO 1 n VIDEO 2 n VIDEO 3
To watch a picture of a DVD player input
from the COMPONENT IN jacks
Press COMPONENT.
The input signal indication will automatically
disappear.
4
Press VOL +/– (VOLUME +/–) to adjust the
volume.
Remote control Monitor
Projecting the
picture
Operations
N
u (power) switch
(continued)
MENU ENTER
VIDEO
MUTING
DISPLAY
RGB COMPONENT
RGB
COMPONENT
VIDEO
or
Remote control Monitor
Remote control Monitor
or
Remote control Monitor
or
or
LAMP RGB COMPONENT VIDEO –VOLUME+ STANDBY
RGB
RGB
VIDEO VIDEO
COMPONENT COMPONENT
VOL
–VOLUME+
LAMP STANDBY