Siemens SPARC ENTERPRISE M8000 - Manual (Page 24)

16 SPARC Enterprise M8000/M9000 Servers Product Notes for XCP Version 1072 • September 2008
6508432 Many correctable errors (CE) may occur, and
despite these are the correctable errors,
domain may panic. This bug has been fixed in Solaris 10 8/07.
For Solaris 10 11/06, this has been fixed in
patch 120011-08.
[Workaround]
Set the following to /etc/system and then
reboot the domain:
set pcie:pcie_aer_ce_mask = 0x2001
6508434 The domain may panic when an additional
PCI-X card is installed or a PCI-X card is
replaced by using PCI hot plug. This bug has been fixed in Solaris 10 8/07.
For Solaris 10 11/06, this has been fixed in
patch 120011-08.
[Workaround]
Do not insert a different type of PCI-X card on
the same PCI slot by using PCI hot plug.
6509337 s10s_u3 wanboot fails - The server returned
416: Requested Range Not Satisfiable. This bug has been fixed in Solaris 10 8/07.
6510861 When Dual-Channel Ultra320 SCSI Card
(SE0X7SC2F, SE0X7SC2X) is mounted,
correctable errors(CE) occur and system may
panic. This bug has been fixed in Solaris 10 8/07.
For Solaris 10 11/06, this has been fixed in
patch 120011-08.
[Workaround]
Add the following entry to the /etc/system
file and then reboot the system:
set pcie:pcie_aer_ce_mask = 0x31c1
6511374 Unexpected error messages may be displayed
on console after changing the system
configuration.
Example:
WARNING: Translation error source
/LSB0/B0/0, PA 3c000000000, target
/LSB0/B0/20000000
This message can be safely ignored.
TABLE 4 Solaris OS Issues and Workarounds (Continued)
CR ID Description Workaround