Symbol Technologies MC70 - Manual (Page 118)

5 - 8 MC70 User Guide
Removing the EDA
To remove the EDA, hold back the release lever on the cradle and pull the EDA up and out of the cradle.
Figure 5-7 Removing the EDA
Charging the Spare Battery
Insert a spare battery to begin charging:
1. Lift the battery release lever.
Figure 5-8 Inserting the Spare Battery
2. Insert the spare battery in the spare battery charging slot in the cradle with the charging contacts facing up
and to the rear of the cradle.
3. Release the battery release lever. The battery release lever locks the spare battery into place.
Release Lever
Extended Capacity
Battery Shown
Battery Release Lever