Symbol Technologies MC70 - Manual (Page 40)

2 - 8 MC70 User Guide
LED Indicators
The MC70 has three LED indicators. The Scan/Decode LED indicates status for scanning. The Charge Status
LED indicates status for main battery charging. The Radio Power Status LED indicates radio status.
Table 2-3
describes the LED indications.
Figure 2-10 LED Indicators
Table 2-3 LED Indications
LED State Indication
Scan/Decode LED
Solid Green Successful decode/capture.
Solid Red Laser enabled, scanning/imaging in process.
Off Not enabled.
Charge Status LED
Slow Blinking Amber Main battery in EDA is charging.
Solid Amber Main battery in EDA is fully charged.
Fast Blinking Amber Charging error.
Off Not charging.
Radio Power Status LED*
Slow Blinking Green Any one of the radios is on.
Off No radio is on.
*The Radio Power Status LED is disabled by default. A registry setting change
is required to make this LED functional. Refer to the MC70 Integrator Guide.
Radio Power
Status LED
Scan/Decode
LED
Charge
Status LED
NOTE
For information about scanning/decoding, see Data Capture on page 2-20. For information
about radio status and settings, see Chapter 3, Using Bluetooth, Chapter 4, Using the
MC7004/MC7094 Phone, or refer to the MC70 Integrator Guide.